Barium chloride (as Ba)
|
CAS
10361-37-2
|
BaCl2
|
RTECS
CQ8750000
|
Synonyms & Trade Names
Barium dichloride
|
DOT ID & Guide
1564 / 154 (barium compound, n.o.s.)
|
Exposure Limits
|
NIOSH REL*: TWA 0.5 mg/m3 [*Note: The REL also applies to other soluble barium compounds (as Ba) except Barium sulfate.]
|
OSHA PEL*: TWA 0.5 mg/m3 [*Note: The PEL also applies to other soluble barium compounds (as Ba) except Barium sulfate.]
|
IDLH
50 mg/m3 (as Ba)
See: IDLH INDEX
|
Conversion
|
Physical Description
White, odorless solid.
|
MW: 208.2
|
BP: 2840°F
|
MLT: 1765°F
|
Sol: 38%
|
VP: Low
|
IP: ?
|
|
Sp.Gr: 3.86
|
Fl.P: NA
|
UEL: NA
|
LEL: NA
|
|
Noncombustible Solid
|
Incompatibilities & Reactivities
Acids, oxidizers
|
Measurement Methods
NIOSH 7056, 7303; OSHA ID121
See: NMAM or OSHA Methods |
Personal Protection & Sanitation (See protection)
Skin: Prevent skin contact
Eyes: Prevent eye contact
Wash skin: When contaminated
Remove: When wet or contaminated
Change: Daily
|
First Aid (See procedures)
Eye: Irrigate immediately
Skin: Water flush immediately
Breathing: Respiratory support
Swallow: Medical attention immediately
|
Respirator Recommendations
NIOSH/OSHA
Up to 5 mg/m3: (APF = 10) Any particulate respirator equipped with an N95, R95, or P95 filter (including N95, R95, and P95 filtering facepieces) except quarter-mask respirators. The following filters may also be used: N99, R99, P99, N100, R100, P100. Click here for information on selection of N, R, or P filters. (APF = 10) Any supplied-air respirator
Up to 12.5 mg/m3: (APF = 25) Any supplied-air respirator operated in a continuous-flow mode (APF = 25) Any powered air-purifying respirator with a high-efficiency particulate filter.
Up to 25 mg/m3: (APF = 50) Any air-purifying, full-facepiece respirator with an N100, R100, or P100 filter. Click here for information on selection of N, R, or P filters. (APF = 50) Any supplied-air respirator that has a tight-fitting facepiece and is operated in a continuous-flow mode (APF = 50) Any powered, air-purifying respirator with a tight-fitting facepiece and a high-efficiency particulate filter (APF = 50) Any self-contained breathing apparatus with a full facepiece (APF = 50) Any supplied-air respirator with a full facepiece
Up to 50 mg/m3: (APF = 2000) Any supplied-air respirator that has a full facepiece and is operated in a pressure-demand or other positive-pressure mode
Emergency or planned entry into unknown concentrations or IDLH conditions: (APF = 10,000) Any self-contained breathing apparatus that has a full facepiece and is operated in a pressure-demand or other positive-pressure mode (APF = 10,000) Any supplied-air respirator that has a full facepiece and is operated in a pressure-demand or other positive-pressure mode in combination with an auxiliary self-contained positive-pressure breathing apparatus
Escape: (APF = 50) Any air-purifying, full-facepiece respirator with an N100, R100, or P100 filter. Click here for information on selection of N, R, or P filters./Any appropriate escape-type, self-contained breathing apparatus
Important additional information about respirator selection
|
Exposure Routes
inhalation, ingestion, skin and/or eye contact
|
Symptoms
Irritation eyes, skin, upper respiratory system; skin burns; gastroenteritis; muscle spasm; slow pulse, extrasystoles; hypokalemia
|
Target Organs
Eyes, skin, respiratory system, heart, central nervous system
|
See also: INTRODUCTION
See ICSC CARD: 0614 See MEDICAL TESTS: 0021 |