Tin(IV) oxide (as Sn)
|
CAS
18282-10-5
|
SnO2
|
RTECS
XQ4000000
|
Synonyms & Trade Names
Stannic dioxide, Stannic oxide, White tin oxide [Note: Also see specific listing for Tin(II) oxide (as Sn).]
|
DOT ID & Guide
|
Exposure Limits
|
NIOSH REL: TWA 2 mg/m3
|
OSHA PEL†: none
|
IDLH
N.D.
See: IDLH INDEX
|
Conversion
|
Physical Description
White or slightly gray powder.
|
MW: 150.7
|
BP: Decomposes
|
MLT: 2966°F (Decomposes)
|
Sol: Insoluble
|
VP: 0 mmHg (approx)
|
IP: NA
|
|
Sp.Gr: 6.95
|
Fl.P: NA
|
UEL: NA
|
LEL: NA
|
|
|
Incompatibilities & Reactivities
Chlorine trifluoride
|
Measurement Methods
NIOSH 7300, 7301, 7303
See: NMAM or OSHA Methods |
Personal Protection & Sanitation (See protection)
Skin: No recommendation
Eyes: No recommendation
Wash skin: No recommendation
Remove: No recommendation
Change: No recommendation
|
First Aid (See procedures)
Eye: Irrigate immediately
Breathing: Fresh air
|
Respirator Recommendations
Not available.
Important additional information about respirator selection
|
Exposure Routes
inhalation, skin and/or eye contact
|
Symptoms
Stannosis (benign pneumoconiosis): dyspnea (breathing difficulty), decreased pulmonary function
|
Target Organs
respiratory system
|
See also: INTRODUCTION
See ICSC CARD: 0954 See MEDICAL TESTS: 0229 |